[nanoPost] Surface Sealings

Company Germany

Glass Protection

The coating material is based upon the chemical nanotechnology. It causes a very good repellent reaction of water and facilitates the removal of dirt and chalk for approx. 90%. That means not many cleaning intervals and an essential lower consumption in detergents.

Water, oil, dirt and chalk resistant coating based upon the chemical nano technology. The Glass Protector protects substrate materials of glass and ceramics against dirt, is resistant against water and oil and chalk can't set down so easily. It protects pore deep against the absorption of dirt even if the water isn't repellent from the surface. The effect can be repaired when working on the surface again. ( recommended 1 time yearly ).

The pore surface of the objects will be sealed antistatic and water resistant thus far better few soilings can stick on the objects. The result is a 90% saving in detergents and expenditure. The sealing is already used by well-known manufactures.

Characteristics
No oil, no lacquer no visible changements at the treated material. Nano components are sealing the surface with a vitreous coating.

- water ( hydrophob ) - and oil resistant ( oleophob ) coating
- pore deep protection against dirt absorption
- preventing protection against germs
- easy cleaning of the coated aereas
- no greasing on the pane
- the use of water will be reduced to a minimum
- strong reduction of the dazzle effect and thus time of reaction and braking distance
- resistant against seawater and salty air, resistant against acid rain
- UV light-solid
- silicon, wax and oil free
- keeps its effect at least 20.000 km or one year
- high production through very low coating thickness

Effect
Surfaces treated with the Glass Protector are reacting "hydrophobic" and "oleophobic" that means they're repelling watery and oleaginous components.

Slows down the dirt of all glass- and ceramic surfaces ( p.ex. car windows, wash basins, shower cubicles panels, windows a.s.o. ). According to the sealing the surfaces can be kept clean with 90% few cleaning power and detergents. The product modifies the treated surface only to the desired degree. The surface refuses not only water but also oil and will be statically neutralized.

Sealing of
windows, mirrors, shower cubicles, glass fronts, canopy, greenhouses, solar panel, car glass windows and glass panels
ceramic products like wash basins, ceramic floor spaces,bath rooms and bath tubes.

 
Application
1. Cleaning the surface

The surface has to be clean and free of grease before the application of the Glass Protector.

Clean the surface with clear water and a sponge.
Dry the surface with a cellulose tissue.
Take off the glass cleaner of the packing and unfold the tissue.
Rub the surface with the Glass Protector and polish dry the surface.
Please take care that you don't touch the surface after the cleaning.

2. Application Glass Protector

Take off the Glass Protector of the packing and unfold the tissue.

Polish the Glass Protector constantly with circulating movements from the middle of the base to the edge. Apply various times on the surface until the tissue is noticeable dry.

the Glass Protector is completely usable after 60 minutes.

Textile Protection

Characteristics:
Intelligent anti-sticking coating for textiles and leather - a clean solution
The Textile Protector can be applied on all kind of fabrics - from the finest silk up to hardwearing cotton; on suits, jackets, shirts, trousers, ties, tracksuits, raincoats, and even on robust adventure-wear. The Nano Textile-/Leather is very water resistant on outdoor-fabrics and thus these remain much longer dry. Oil, coffee and other spread spots belong to the past.

Textile Protector - the invisible fibres protection
If you stay dry in rain or if you're protected against "spot midgets" of daily life you can always rely on the Textile Protector !

This innovative fibre protection protects your clothes against water, dirt, spots and remains invisible! It's not influencing in any way their appearance, respiration activity, colour and feel and it is easy to handle.

water based, invisible sealing
protects textile and leather against water, dirt and spots
skin neutral, solvent-free, ecologically friendly
no influence upon appearance, respiration activity, colour and feel
 

Effect
The Textile Protector covers every single fibre with an invisible Antisticking coating. This protection causes that the dried dirt isn't sticking on the fibres.

Skin well-tolerated and ecologically friendly
The fibres coated with the Textile Protector behave neutral with your skin. The sealing is free of solvents and based upon water.

Application
Cleaning textiles/leather
The better the pre-cleaning, the better is the effect of the sealing.

The fibres have to be clean, dry and free of textile help-and preparations means. Spray on the strong pollutions with the pre-cleaner (50ml Isopropanol) and clean the big surfaces with the tissue enclosed. Let the cleaned surfaces become completely dry until it feels dry, at least one hour.

Application of the Textile Protector
Before using the Textile Protector shake strongly the Textile Protector Protector and spray it finely at a distance from approx. 15 cm on the textiles. Spray only as far as the textile is a little bit moisten and there is formatting a constantly wet film. There should be avoided a puddle formation.

Recommandation: Before use try it at an invisible place.

Information
Before use shake strongly and spray it at a distance from approx. 15 cm on the textile. Spray only as far as the textile is a little bit moisten and there is formating a constantly wet film. There should be avoided a puddle formation. When using it on patent-and imitation leather surfaces please try it at a hidden place before.

Anti Fog

Set for the nanotechnical treatment of glass, ceramic and synthetic surfaces for indoors and outdoors.
The Nano-Antifog gives your surfaces a long lasting anti-fog effect. According to its hydrophilic character the new pollution will be delayed strongly and the cleaning effect of the treated surface will be considerably improved.

No more condensation of the car windows. The security and the general well-being will be clearly increased through the clear visibility.

Anti-fog effect on all glass-,ceramic- and synthetic surfaces
Increased security in road traffic
Relieves considerably the cleaning of the treated surface
Quick and easy apply
The effect lasts for many months

Effect
The Nano-Antifog set is an optimal adjusted care- and sealing system which consists of a cleaner and of a nanotechnical sealing lacquer.

Through the cleaning with the pre-cleaner and the following apply with the Nano-Antifog there'll put an ultra thin, invisible sealing coating on the surface. The surface is protected for a long time against new pollution and shows a clearly better cleaning effect.

The Nano-Antibeschlag is in a soft way high effective and ensures a completely clean and non condensed surface. The Nano-Antifog consists of nanotechnical particles which are combining fix with the surface.

All the ingredients of the Nano-Antifog arrange independently during the apply. The binding components wander to the treated surface; the anti-sticking componentsare orientating to the air. At this kind of "self-organisation" the ultra thin, invisible and neutral surface coating is protecting.

Oil, greases, water and dirt can't combine anymore with the surface. Besides the integrated caresystem is protecting the surface against harmful environment influences even when using the product outdoors and ensures for the valency of the treated surface. The Nano-Antifog has been developed for the care and for the sealing of all glass, ceramic and synthetic surfaces.

The treated surface shows a strong slow new pollution and an immense improvement of the cleaning effect (hydrophoby). The anti-fog effect arises according to the weather conditions after one day. The Nano-anti fog is suitable for outdoors and indoors.

For cleaning the treated surface clear water is sufficient. You don't have to add detergents.

The Nano-Antifogprotects the surface during several months and contributes to your security and to your general well-being in the car. When the effect is decreasing the procedure has to be repeated as described. In the set you'll find everything what do you need for the treatment of 10 sqm surface.

Application
Cleaning of the surface
The better the pre-cleaning, the better is the effect of the sealing. The surface has to be clean, dry and completely free of grease , tenside and wax. Spray on the sealing surface with the pre-cleaner and clean it with the drying tissue. The cleaned surface has to be dried completely and don't touch with your fingers anymore!The better the pre-cleaning, the better is the effect of the sealing. The surface has to be clean, dry and completely free of grease , tenside and wax. Spray on the sealing surface with the pre-cleaner and clean it with the drying tissue. The cleaned surface has to be dried completely and don't touch with your fingers anymore!

Application of the Nano-Antifog
Open the Nano-AntifogSachet and take off the tissue. One Nano-Antifog tissue is sufficient for the coating of approx. 1 sqm. You have to rub sparingly and constantly the Antifog with the tissue on the surface which has to be sealed. Afterwards the surface has to be dried for minimum 15 - 30 minutes. Then polish slightly the surface with the enclosed drying tissue in order to remove surplus coating ( coating or white stripes ). The antifog effect will occur after one day depending on the weather conditions. When the effect is decreasing the procedure can be repeated as descriped.